Southeast Asia’s Cutting Edge Technology Provider in Machine Vision, Industrial Automation and Industry 4.0

Flare Series

Flare Series

IO Industries Inc. designs cutting-edge digital video and machine vision equipment. Victorem™ family of c ameras combine high-quality CMOS sensor s from Sony and GPix el, with high-thr oughput interfaces such as Co aXPress and 12G-SDI. Specifications: ・2K/HD and 4K/UHD models ・Global Shutt er CMOS sensor s fr om CMOSIS ・Multiple 3G/HD-SDI output f ormats (SMTPE 292/425M) ・Tri-Level Sync input for multi-camera synchronization

Industry Applications:

FLARE SDI

Specifications

  • 2K/HD and 4K/UHD models
  • Global Shutter CMOS sensors from CMOSIS
  • Multiple 3G/HD-SDI output formats (SMTPE 292/425M)
  • Tri-Level Sync input for multi-camera synchronization

Flare 4KSDI

SPECIFICATIONS

Camera Model Flare 4KSDI
TDI Line Scan CMOS
Output Modes UHD or DCI 4K up to 60 fps
Optical Format Super 35mm / APS-C (4K: 25.5mm diagonal, UHD: 24.2mm diagonal)
Sensor Type CMOS w. global electronic shutter
Dynamic Range 60 dB (10 Stops)
Output Interface Quad-Link HD-SDI, Dual-Link 3G-SDI or Quad-Link 3G-SDI
Output Format 10-bit 4:2:2(Y’Cb’Cr’), 4:4:4 (RGB) or RAW (Bayer)
Exposure Control Automatic (AEC) or manually adjustable
Luma Control Gamma, master pedestal, white clipping offset with adjustable knee function
Color Control RS-485, use handheld remote for OSD or use PC software, cables up to 1000 ft
Synchronization Tri-level sync input (BNC)
Camera Configuration RS-485, use handheld remote for OSD or use PC software, cables up to 1000 ft

MECHANICAL/ELECTRICAL

Dimensions 91.7 mm x 91.7mm x 47.7 mm (not including lens mount)
Lens Mount Active EF-mount, Passive EF-Mount, F-mount, PL-Mount
Camera Mounting Points 1x 3/8″-16, 7x 1/4″-20, 8x #M4x0.7
Weight 750g (not including lens mount)
Power Requirements 10W, 7-19V DC via Hirose 12-pin
Operating Temperature –40°C to 85°C, 10-90% humidity (non-condensing)
Storage Temperature –40°C to 85°C, 10-90% humidity (non-condensing)

OUTPUT MODES

Quad-Link HD-SDI or Dual-Link 3G-SDI:
UHD 10-bit 4:2:2/RAW: 23.98, 24, 25, 29.97, 30
4K 10-bit 4:2:2/RAW: 23.98, 24, 25, 29.97, 30
Quad-Link 3G-SDI :
UHD 10-bit 4:2:2/RAW: 50, 59.94, 60
UHD 10-bit 4:4:4: 23.98, 24, 25, 29.97, 30
4K 10-bit 4:2:2/RAW: 47.95, 48, 50, 59.94, 60
4K 10-bit 4:4:4 23.98, 24, 25, 29.97, 30

FLARE CAMERA LINK

Specifications
  • 2MP, 4MP and 12MP models
  • Monochrome, NIR and Color CMOS sensors from CMOSIS
  • Fast frame rates especially with reduced ROI
  • Flexible Camera Link output, from CL-Base to CL-Full 80-bit

Flare 12M125-CL

SPECIFICATIONS

Camera Model Flare 12MP
Sensor Size (H x V) 4096 x 3072
Frame Rate CX: 187 fps (8-bit), 149 fps (10-bit)
(full resolution) CL: 124 fps (8-bit), 100 fps (10-bit)
Optical Format Super 35mm / APS-C (28.1mm diagonal)
Sensor Type CMOS w. global electronic shutter
Sensor Options Monochrome, color (Bayer) or NIR-enhanced monochrome
Pixel Size 5.5 x 5.5μm
Dynamic Range / Sensitivity 60 dB, 4.64 V/lux.s
Output Configurations CX: 1/2/4 links at 3.125Gbps (CXP-3), 5.0Gbps (CXP-5) or 6.25Gbps (CXP-6)
CL: Base, Medium, Full, Full 80-bit, Dual Full 80-bit (80MHz Pixel Clock)
Pixel Bit Depth Gamma, master pedestal, white clipping offset with adjustable knee function
Color Control 8-bit or 10-bit
Exposure Control Trigger width, timed, or auto-exposure control
Image Correction Black level, row and column-based FPN/PRNU correction, bad pixel replacement
Color Processing Auto white balance (tracking or manual), programmable LUTs
Camera Configuration GenICam (CX), ASCII commands (CL), or Flare Control software
Flat Field Correction Available for CX camera models

MECHANICAL/ELECTRICAL

Dimensions 91.7 mm x 91.7mm x 74.5 mm (with F-mount)
Lens Mount F-mount, Active EF-mount, C-mount or T-mount (M42 x 0.75)
Camera Mounting Points 8x 1/4″-20, 12x M4x0.7
Weight 600g (with F-mount)
Power Requirements CX: 9.5W, 7-26V DC via Hirose 12-pin or 24V via PoCXP
CL: 7.5W, 12V DC via Hirose 12-pin
Additional I/O (Hirose 12-pin) TTL-level trigger input/output, EF-mount lens control interface
Operating Temperature –30°C to 45°C, 20-85% humidity (non-condensing)
Storage Temperature –40°C to 85°C, 10-90% humidity (non-condensing)

Flare 4M180-CL

SPECIFICATIONS

Camera Model Flare 4MP
Sensor Size (H x V) 2048 x 2048
Frame Rate
(full resolution)
CX: 140 fps (8-bit), 112 fps (10-bit)
CL: 179 fps (8-bit), 149 fps (10-bit)
Optical Format 1″ (15.9mm diagonal)
Sensor Type CMOS w. global electronic shutter
Sensor Options Monochrome, color (Bayer) or NIR-enhanced monochrome
Pixel Size 5.5 x 5.5μm
Dynamic Range / Sensitivity 60 dB, 4.64 V/lux.s
Output Configurations CX: 1 or 2 links at 3.125Gbps (CXP-3)
CL: Base, Medium, Full, Full 80-bit (80MHz Pixel Clock)
Pixel Bit Depth Gamma, master pedestal, white clipping offset with adjustable knee function
Color Control 8-bit or 10-bit
Exposure Control Trigger width, timed, or auto-exposure control
Image Correction Black level, row and column-based FPN/PRNU correction, bad pixel replacement
Color Processing Auto white balance (tracking or manual), programmable LUTs
Camera Configuration GenICam (CX), ASCII commands (CL), or Flare Control software
Flat Field Correction -

MECHANICAL/ELECTRICAL

Dimensions 63.5 mm x 63.5mm x 44.1 mm
Lens Mount C-mount or T-mount (M42 x 0.75)
Camera Mounting Points -
Weight 310g
Power Requirements CX: 4.5W, 12-24V DC via Hirose 12-pin or 24V via PoCXP
CL: 2.5W, 12V DC via Hirose 12-pin or PoCL
Additional I/O (Hirose 12-pin) Opto-isolated trigger input/output, EF-mount lens control interface
Operating Temperature –10°C to 50°C, 20-85% humidity (non-condensing)
Storage Temperature –40°C to 85°C, 10-90% humidity (non-condensing)

Flare 2M360-CL

SPECIFICATIONS

Camera Model Flare 4MP
Sensor Size (H x V) 2048 x 2048
Frame Rate
(full resolution)
CX: 140 fps (8-bit), 112 fps (10-bit)
CL: 179 fps (8-bit), 149 fps (10-bit)
Optical Format 1″ (15.9mm diagonal)
Sensor Type CMOS w. global electronic shutter
Sensor Options Monochrome, color (Bayer) or NIR-enhanced monochrome
Pixel Size 5.5 x 5.5μm
Dynamic Range / Sensitivity 60 dB, 4.64 V/lux.s
Output Configurations CX: 1 or 2 links at 3.125Gbps (CXP-3))
CL: Base, Medium, Full, Full 80-bit (80MHz Pixel Clock)
Pixel Bit Depth Gamma, master pedestal, white clipping offset with adjustable knee function
Color Control 8-bit or 10-bit
Exposure Control Trigger width, timed, or auto-exposure control
Image Correction Black level, row and column-based FPN/PRNU correction, bad pixel replacement
Color Processing Auto white balance (tracking or manual), programmable LUTs
Camera Configuration GenICam (CX), ASCII commands (CL), or Flare Control software
Flat Field Correction -

MECHANICAL/ELECTRICAL

Dimensions 63.5 mm x 63.5mm x 44.1 mm
Lens Mount C-mount or T-mount (M42 x 0.75)
Camera Mounting Points -
Weight 310g
Power Requirements CX: 4.5W, 12-24V DC via Hirose 12-pin or 24V via PoCXP
CL: 2.5W, 12V DC via Hirose 12-pin or PoCL
Additional I/O (Hirose 12-pin) Opto-isolated trigger input/output, EF-mount lens control interface
Operating Temperature –10°C to 50°C, 20-85% humidity (non-condensing)
Storage Temperature –40°C to 85°C, 10-90% humidity (non-condensing)

FLARE COAXPRESS

Specifications
  • 2MP, 4MP and 12MP models
  • Monochrome, NIR and Color CMOS sensors from CMOSIS
  • Fast frame rates especially with reduced ROI
  • Long-distance coaxial cabling with power for camera

Flare 48M30-CX

SPECIFICATIONS

Camera Model Flare 48MP
Sensor Size (H x V) 7920 x 6004 (47.5MP)
Frame Rate 39 fps
(full resolution) CL: 124 fps (8-bit), 100 fps (10-bit)
Optical Format 35mm Full Frame (45.7mm diagonal)
Sensor Type CMOS w. Global Electronic Shutter
Sensor Options Monochrome or Color (Bayer)
Pixel Size 4.6 x 4.6 μm
Dynamic Range / Sensitivity 64dB, 4 V/lux.s
Output Configurations 1/2/4 links at 2.40Gbps (CXP-2), 3.125 Gbps (CXP-3), 5.0Gbps (CXP-5) or 6.25Gbps (CXP-6)
Pixel Bit Depth 8/10/12-bit
Multiple ROI Up to 10 separate windows
Exposure Control Trigger width, timed, or auto-exposure control
Image Correction Black level, row and column-based FPN/PRNU, bad pixel replacement, flat field correction
Color Processing Auto white balance (tracking or manual), programmable LUTs
Camera Configuration GenICam or Flare Control software

MECHANICAL/ELECTRICAL

Dimensions 79.7 mm x 79.7 mm x 78.0 mm (WxHxD with F-mount)
Lens Mount F-mount, M58 x 0.75, Active Canon EF, others upon request
Weight 610g (with F-mount, no lens)310g
Power Requirements 7.9W, 7-26V DC via Hirose 12-pin or 24V via PoCXP
Additional I/O (Hirose 12-pin) TTL-level trigger input/output
Operating Temperature –30°C to 45°C, 20-85% humidity (non-condensing)
Storage Temperature –40°C to 85°C, 10-90% humidity (non-condensing)

Flare 12M180-CX

SPECIFICATIONS

Camera Model Flare 12MP
Sensor Size (H x V) 4096 x 3072
Frame Rate CX: 187-fps (8-bit), 149 fps (10-bit) CL: 124 fps (8-bit), 100 fps (10-bit)
Optical Format Super 35mm / APS-C (28.1mm diagonal)
Sensor Type CMOS w. global electronic shutter
Sensor Options Monochrome, color (Bayer) or NIR-enhanced monochrome
Pixel Size 5.5 x 5.5μm
Dynamic Range / Sensitivity 60 dB, 4.64 V/lux.s
Output Configurations CX: 1/2/4 links at 3.125Gbps (CXP-3), 5.0Gbps (CXP-5) or 6.25Gbps (CXP-6)
CL: Base, Medium, Full, Full 80-bit, Dual Full 80-bit (80MHz Pixel Clock)
Pixel Bit Depth 8-bit or 10-bit
Multiple ROI Trigger width, timed, or auto-exposure control
Exposure Control Black level, row and column-based FPN/PRNU correction, bad pixel replacement
Image Correction Auto white balance (tracking or manual), programmable LUTs
Color Processing GenICam (CX), ASCII commands (CL), or Flare Control software
Camera Configuration Available for CX camera models

MECHANICAL/ELECTRICAL

Dimensions 91.7 mm x 91.7mm x 74.5 mm (with F-mount)
Lens Mount F-mount, Active EF-mount, C-mount or T-mount (M42 x 0.75)
Weight 600g (with F-mount)
Power Requirements CX: 9.5W, 7-26V DC via Hirose 12-pin or 24V via PoCXP
CL: 7.5W, 12V DC via Hirose 12-pin
Additional I/O (Hirose 12-pin) TTL-level trigger input/output, EF-mount lens control interface
Operating Temperature –30°C to 45°C, 20-85% humidity (non-condensing)
Storage Temperature –40°C to 85°C, 10-90% humidity (non-condensing)

Flare 4M140-CX

SPECIFICATIONS

Camera Model Flare 4MP
Sensor Size (H x V) 2048 x 2048
Frame Rate CX: 140 fps (8-bit), 112 fps (10-bit)
CL: 179 fps (8-bit), 149 fps (10-bit)
Optical Format 1″ (15.9mm diagonal)
Sensor Type CMOS w. global electronic shutter
Sensor Options Monochrome, color (Bayer) or NIR-enhanced monochrome
Pixel Size 5.5 x 5.5μm
Dynamic Range / Sensitivity 60 dB, 4.64 V/lux.s
Output Configurations CX: 1 or 2 links at 3.125Gbps (CXP-3)
CL: Base, Medium, Full, Full 80-bit (80MHz Pixel Clock)
Pixel Bit Depth 8-bit or 10-bit
Multiple ROI -
Exposure Control Trigger width, timed, or auto-exposure control
Image Correction Black level, row and column-based FPN/PRNU correction, bad pixel replacement
Color Processing Auto white balance (tracking or manual), programmable LUTs
Camera Configuration GenICam (CX), ASCII commands (CL), or Flare Control software

MECHANICAL/ELECTRICAL

Dimensions 63.5 mm x 63.5mm x 44.1 mm
Lens Mount C-mount or T-mount (M42 x 0.75)
Weight 310g
Power Requirements CX: 4.5W, 12-24V DC via Hirose 12-pin or 24V via PoCXP
CL: 2.5W, 12V DC via Hirose 12-pin or PoCL
Additional I/O (Hirose 12-pin) Opto-isolated trigger input/output, EF-mount lens control interface
Operating Temperature –10°C to 50°C, 20-85% humidity (non-condensing)
Storage Temperature –40°C to 85°C, 10-90% humidity (non-condensing)

Flare 2M280-CX

SPECIFICATIONS

Camera Model Flare 2MP
Sensor Size (H x V) 2048 x 1088
Frame Rate CX: 264 fps (8-bit), 211 fps (10-bit)
CL: 337 fps (8-bit), 281 fps (10-bit)
Optical Format Approx. 2/3″ (12.7mm diagonal)
Sensor Type CMOS w. global electronic shutter
Sensor Options Monochrome, color (Bayer) or NIR-enhanced monochrome
Pixel Size 5.5 x 5.5μm
Dynamic Range / Sensitivity 60 dB, 5.56 V/lux.s
Output Configurations CX: 1 or 2 links at 3.125Gbps (CXP-3)
CL: Base, Medium, Full, Full 80-bit (80MHz Pixel Clock)
Pixel Bit Depth 8-bit or 10-bit
Multiple ROI -
Exposure Control Trigger width, timed, or auto-exposure control
Image Correction Column-based FPN/PRNU correction, bad pixel replacement
Color Processing Auto white balance (tracking or manual), programmable LUTs
Camera Configuration GenICam (CX), ASCII commands (CL), or Flare Control software

MECHANICAL/ELECTRICAL

Dimensions 63.5 mm x 63.5mm x 44.1 mm
Lens Mount C-mount
Weight 310g
Power Requirements CX: 4.5W, 12-24V DC via Hirose 12-pin or 24V via PoCXP
CL: 2.5W, 12V DC via Hirose 12-pin or PoCL
Additional I/O (Hirose 12-pin) Opto-isolated trigger input/output, EF-mount lens control interface
Operating Temperature –10°C to 50°C, 20-85% humidity (non-condensing)
Storage Temperature –40°C to 85°C, 10-90% humidity (non-condensing)